Attonic FG1 Manuale operativo - Pagina 7

Sfoglia online o scarica il pdf Manuale operativo per Strumenti di misura Attonic FG1. Attonic FG1 20. Digital force gauge

5.Preparation for measurement

5-1.Check the charging status
Be sure to check the charging status (battery icon) before using this gauge.
* The sign on the upper left of the screen is the battery icon.
* If you need to recharge the battery immediately, use the supplied AC adaptor to recharge the battery.
Battery icon
:In good condition with more than 50% power remained.
:Less than 50% remaining. A status that requires caution. (still usable)
:Recharging is required immediately.
5-2.Mounting
・When measuring by holding this gauge in your hand, please be careful about the surroundings.
・When fixing this gauge, use a tool appropriate to fixing it firmly in 3 places with M4 screws.
* When fixing to a device, etc., check the fixing method and fix this gauge firmly with a tool, etc.
5-3.Attachment installation
・Use the supplied attachments according to the measurement conditions.
* If you cannot measure with the supplied attachments, please contact us.
We also manufacture special attachments.
* Do not use attachments from other suppliers. They may cause a malfunction or injury.
Cautions
・When the power is turned off, the stored data (N:〇〇〇) will be cleared to zero.