Audiotec Fischer MATCH UP X4BMW-FRT.1 Manuale - Pagina 11
Sfoglia online o scarica il pdf Manuale per Altoparlanti per auto Audiotec Fischer MATCH UP X4BMW-FRT.1. Audiotec Fischer MATCH UP X4BMW-FRT.1 17. Upgrade speaker systems for bmw vehicles
Stampa la pagina
Installation
Removal of the door panel / rear side panel
In order to install the MATCH speakers in the origi-
nal mounting positions it is mandatory to remove
the door panels / rear side panels.
If you are uncertain how to remove the panels,
please either ask your local BMW dealer or an ex-
perienced car audio dealer for assistance. In any
case follow the instructions of the car manufacturer.
Please pay attention to the following notes:
1. The cover is fastened with several hidden screws
to the metal sheet of the car. Make sure that you
have loosened all screws before you try to re-
move the cover.
2. Additionally the cover is fixed by numerous plas-
tic clips, which may be damaged during the dis-
assembly when the ambient temperature is be-
low 10°C. Always pull the cover horizontally to
loosen the clips – never apply any vertical force.
Note that broken plastic clips have to be replaced
before reinstalling the cover in order to avoid un-
desired rattle and noise.
Installation of the UP X4BMW-FRT.1, .2 & .3
After you have dismantled the cover, you can re-
move the original midrange speaker. Then con-
nect the UP X4BMW-FRT.1 / .2 / .3 to the original
speaker cable harness and insert it into the original
mounting position.
If the loudspeaker is directly driven by the car radio,
the enclosed inline crossover must be plugged be-
tween the speaker and the original speaker cable
harness.
To speaker
Installation of the UP X4BMW-FRT.1:
Installation of the UP X4BMW-FRT.2:
To original speaker
cable harness
11