Audiotec Fischer match MS 4X-BMW.1 Manuale - Pagina 12

Sfoglia online o scarica il pdf Manuale per Altoparlanti Audiotec Fischer match MS 4X-BMW.1. Audiotec Fischer match MS 4X-BMW.1 17. Car-specific speaker systems

Stampa la pagina

After the installation of the speakers you have to

connect them to the inline crossover networks. Fi-

nally you have to connect the original speaker cable

to the input of the inline crossover network. This re-

quires cutting off the original connector with pincers.

Never cut the cables directly behind the connector

itself if you like to reconnect them at a later date.

The original speaker cables have to be equipped

with the crimp terminals. These crimp terminals

stick in the cables of the inline crossover network.

If you don't have a dedicated crimping tool you can

use combination pliers for fixing the terminals to the

original cables as well.

Installation of the MS 4B-BMW.1 / MS 4X-BMW.1:

Installation of the MS 8B-BMW.1

The installation of the under-seat subwoofers re-

quires dismantling the front seats of the car, each

fixed by four screws. Next you have to remove the

original speaker grilles, allowing accessing the woo-

fers themselves. Now replace the original woofers

by the new MATCH subs. For proper operation

of the subwoofers it might be necessary to partly

remove the foam around the speaker mounting

hole. After that you have to re-assemble the origi-

nal speaker grilles. Finally you have to reinstall the

front seats. Please double-check that you have tigh

ten each of the four mounting screws of each seat

properly!

Installation of the MS 8B-BMW.1:

Important information for the installa-

tion in a 5-series BMW (E60/E61)

The speaker systems MS 83C-BMW.1, MS 42C-

BMW.1 and MS 4X-BMW.1 can only be installed

in a BMW 5-series with the internal model number

E60/61 if the notch at the original metal part will be

removed.

remove

notch

original metal board