Apogee ensemble Manuale supplementare

Sfoglia online o scarica il pdf Manuale supplementare per Accessories Apogee ensemble. Apogee ensemble 2. Apogee ensemble audio interface: product brochure
Anche per Apogee ensemble: Manuale del software (1 pagine), Opuscolo (2 pagine)

ApogeeTechNotes:
ReadMe
Ensemble Update - May 2008
In This Document
This document describes the installation procedure, new features and resolved issues for the May 2008 Ensemble Up-
date. The update is comprised of two parts, the Ensemble Software Installer and the Ensemble Firmware Updater.
Who Should Update
All Ensemble users should update to May 2008 versions.
Requirements
Macintosh G4 1GHz or faster, G5 or Intel CPU
1 GB RAM minimum, 2 GB recommended
OSX 10.4.11 or greater must be installed, OSX 10.5.3 is highly recommended
Please check our website for newer versions here:
http://www.apogeedigital.com/downloads/documents.php?show=ensemble
To Install Driver and Software
1.
IMPORTANT - The order in which these steps are completed is critical to a successful update.
2.
Download the
Ensemble Update May 2008 file.
3.
Double-click on the
the Installer. After installation it will be necessary to re-start your Mac. After re-starting, a Version mismatch mes-
sage may appear; this is entirely normal and indicates the need to update Ensemble firmware as described below.
To Update Firmware
1.
Before updating firmware:
UPDATE to Ensemble MAY08 software;
TURN OFF all speakers connected to Ensemble and disconnect all headphones;
REMOVE all other Firewire devices (hard drives, audio and video devices.
2.
Double- click on the EnsembleUpdater icon to launch the updater application.
3.
If the connected Ensemble requires an update, the
mains grey, the Ensemble isn't detected or doesn't require a firmware update.
4.
If required, press the
5.
Once the update is complete, power off Ensemble, re-start the Mac, and power on Ensemble once the Mac has
re-started.
Apogee Electronics • 1715 Berkeley Street Santa Monica, California 90404 • 310-584-9394 • [email protected]
Ensemble Software Installer icon to initiate installation, and follow instructions provided by
Update button.
Update button text becomes black; if the Update button re-
support