Apollo Sprayers MAXI-MISER PBC7600-GTO Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Spruzzatore di vernice Apollo Sprayers MAXI-MISER PBC7600-GTO. Apollo Sprayers MAXI-MISER PBC7600-GTO 20.

Stampa la pagina

2. PBC7600-GTO HVLP Spray Guns

CONGRATULATIONS!! You have just purchased the PBC7600-GTO Spray gun, the finest spray

gun available to spray cars, boats and airplanes. When combined with one of our turbo finishing

systems you find that you will enjoy the great benefits of the TrueHVLP. Our designs are the

result of over 40 years of experience in manufacturing HVLP turbo spray systems and spray

guns. We have painstakingly worked and consulted with professional spray finishers in your

industry to bring you this versatile, well-engineered tool.

Whether you are new to spray finishing, you have spray finished before, or are just new to

spraying; there are some basic spray finishing guidelines that will help you to achieve the best

results and optimum success from your new equipment. Reading this information carefully and

following these simple steps will ensure that you get the best performance and results from your

new TrueHVLP™ spray gun.

Check the contents of your box. The following are included:

(1) PBC7600-GTO Spray gun

(1) Instruction Manual

(1) Wrench

(1) Non-return valve

3. How Your PBC7600-GTO Spray Gun Works

Your PBC7600-GTO Spray gun operates similar to a typical compressed air spray gun with some minor differences. The

cup on your PBC7600-GTO spray gun is pressurized through the air feed tube. This will help deliver fluid to the tip/nozzle

and produce a larger fan pattern. It is possible to use the PBC7600-GTO spray gun without the air feed tube connected, but

only with certain types of paints and using larger needle and nozzle sizes. You will notice a much smaller fan pattern when

using the spray guns without the air feed tube connected.

When the material adjustment screw is opened and the trigger pulled back, fluid flows through the tip/nozzle mixing with the

air flow delivered from the air cap and projects a fine atomized mist to your work piece. You can adjust the fluid flow by

opening or closing the material adjustment screw to your liking. The fan adjustment ring is located in the front of the spray

gun. Locate the adjustment marks on the side of the spray gun body. Turn the fan control ring up to achieve a smaller fan

or down to achieve a larger fan.

4. The PBC7600-GTO & Turbine Systems

The PBC7600 is a standard turbine spray gun – non-bleed type. When the turbine is turned on, NO air will flow through the

spray gun. When the trigger is partially pulled, air will flow through the air cap. When the trigger is fully pulled, paint will flow

through the nozzle (tip) to meet the air flow, atomize, and project to your work surface. It is most important that your

turbine system be equipped with a proper internal air relief valve to handle the back pressure when the trigger is

released, and the turbine is running.

If you are using the Apollo PBC7600 spray gun with a turbine system other than one manufactured by APOLLO, it is advised

to inquire with the turbine manufacturer to determine if your unit is configured to accept a non-bleed spray gun. If you are not

sure, or if you cannot get accurate information, it is strongly advised that you install Apollo part number A7538A prior to using

the PBC7600 spray gun.

(1) Air Feed Connector

(1) Cleaning Brush

(1) Spray Gun Lube

(1) Cup Top Gasket