AddSecure IRIS-4 160 Manuale rapido di installazione e manutenzione - Pagina 8

Sfoglia online o scarica il pdf Manuale rapido di installazione e manutenzione per Sistema di sicurezza AddSecure IRIS-4 160. AddSecure IRIS-4 160 11.

Stampa la pagina

IRIS-4 160

Quick Installation and

Maintenance Guide

6.10. Panel Configuration

Panel Configuration for Dial Capture

If connecting the IRIS-4 160 dialler via the dial

capture method which is connecting the Telecoms

module of the panel to the dial port of the IRIS-4

160, the following options will need to be config-

ured:

Telephone Number = the 12 digit format of the

Monitoring Centre IP address

(e . g . 192 . 1 68 . 0 . 3 4 would become 192168000034) .

Account Number: 4 – 6 digit account number

allocated by the Monitoring Centre .

Note: If the 'Alarm Override' mode is selected,

the IRIS-4 160 dialler replaces the phone number

and the account number used by the alarm dialler

with the IP address of the Monitoring Centre and

account number entered during configuration, so

there is no need to change any settings on the

alarm panel.

Alarm panel integration e.g. Honeywell Galaxy

(RS485 connection) Texecom Premier range

(RS232 TTL connection).

If you have not already made the changes to the

relevant configurations in the panel for the integra-

tion, and require further details on these configura-

tions then please download the full panel installation

manual from http://www . a ddsecure . c om .

6.11. testing

Once all configurations are complete, perform a full

commissioning test with the Monitoring Centre .

This will normally involve testing normal alarm

transmissions from the alarm panel over all commu-

nication paths to the Monitoring Centre . Verifying

acknowledgement of these alarms with the operators

at the Monitoring Centre .

7. MaIntenanCe

Inspect the dialler on an annual basis .

At each inspection, please perform the following:

• Confirm the status of the IRIS-4 160 unit.

• Clear any faults on the dialler.

• Check battery status and replace if below

required level .

• Reflash IRIS-4 160 software to latest version.

• Test the configured communication paths

(Ethernet/Wi-Fi/4G/3G/2G) .

• Perform full test of alarms from the alarm panel

and confirm acknowledgement of these by the

operators at the Monitoring Centre .

The IRIS-4 160 will give a visual indication of the

current system status via the SYS LED on top left

side of case . If this is green the dialler is all reporting

ok, if red the dialler has some trouble events being

reported .

LeD CoLouR

InDICatIon

Default state not currently configured

Red Flashing

Wi-Fi successfully connected but still outstanding faults

Red Constant

Blue Flashing

In Bluetooth mode for configuration but with no current connection

Blue Constant

In Bluetooth mode for configuration and a device is connected

Purple Flashing

In Access point mode (AP) for configuration but with no current connection

Purple Constant

In Access point mode for configuration and a device is connected (AP)

Communicating and no current faults (flickers on every poll)

Green Constant

IRIS-4 160

Engineers have the option via the Web Browser

screen, or in the AddSecure Bluetooth app (coming

soon), to see current faults, reflash to latest software

and perform communication path checks .

To initiate the Wi-Fi connection engineers will need

to ensure the IRIS-4 160 has power and then perform

a Tap Tap (1/2 second gap between) on the front

cover to put the dialler in Wi-Fi Access Point or

Bluetooth mode (SYS LED flashing Purple or Blue

depending on the desired connection) .

You now have a 30 minute time window to search

and find the 'IRIS' using either a smartphone, tablet

or laptop's Wi-Fi/Bluetooth connect search function .

For Wi-Fi an 'IRIS' network should appear . Please

connect to this which should turn the SYS LED

solid 'blue' and using the web browser connect to the

IRIS-4 160 web interface by browsing to 'iris . l ocal' .