ADE M70612 Manuale operativo - Pagina 5
Sfoglia online o scarica il pdf Manuale operativo per Bilance ADE M70612. ADE M70612 7. Electronic lifter scale
Tare Function
Use the TARE key when the patient is weighed with any other equipment (such as carrying equipment,
belts, suspension yoke etc.). Weight the equipment first. After the weight is indicated press Tare key to
adjust the scale back to zero. The weight of the stored value will be deducted for all future weighing
procedures unless the tare function is used another time.
The weight displayed in the patient's net weight.
GROSS/NET function
Using the GROSS/NET key you can jump between gross and net subject to a tare value has been
stored.
Zero setting
Pressing the Zero key you may eliminate minor weighing irregularities which may occur after starting
the scale and the scale will be set to zero.
Printing function
In case a printer has been connected and the printing menu has been activated the<PRINT> function is
sending the weight result to the printer. In case no printer has been connected the function is
interrrupted after 10 seconds.
„Lifeweight" - function
The f- key is manually activated and deactivated dependant from the requirement to weigh extremely
restless patients and getting a reliable result. In case the Lifeweight function is activated the scale
identifies all major movements caused by the patient during weighing in either direction and is
automatically cutting these irregularities off. Different automatical measurements done during weighing
the final weight of the patient displayed is most accurate.
Display symbols
NET
~
(Motion)
(above limit)
(below limit)
(Battery)
060100-Rev000-M70612
Scale is under tare
Scale is in motion
The limit has been exceeded
Off limit
Batteries low – insert fresh ones
4