ADE PFA1000 Manuale operativo - Pagina 5

Sfoglia online o scarica il pdf Manuale operativo per Bilance ADE PFA1000. ADE PFA1000 15. Electronic precision scale

Adjust the scale

Take the scale and the equipment carefully out of the carton and check it for completeness.

Adjust the scale in this way that all four feet have contact with the footprint, which should be safe

and even.

Check the horizontal stand of the scale by the help of the bubble level which is insert (seen

from the operator side) on the backside of housing.

At correct adjustment, the bubble must be in the centre of the circle.

In case of an uneven stand, you can balance the level by the help of the four levelling feet. For this

purpose, rotate the relevant foot out of the housing more in or out.

Before first time use place the stainless steel weighing platform on the weighing plate and if

necessary adjust the draft shield on the scale in that way that all four corners are outside of the

rubber mounts and find one's feet.

For protection against outside influences during the weighing procedures, place the cover on the

draft shield frame.

The wind shield is only applicable for round weighing platforms.

(Model PFA1000)

1. Remove packaging and protection fims before assembling.

2. Insert four shores to the frame

as the arrow shown. Please see

the order alternation of notch (Pic 1).

3. Insert 4 side sheets into frame and

and shores ordinally (Pic 2).

4. A second frame has to be mounted

on the top of the four side sheets (Pic 3)

5. Insert handle and top sheet then place

them on the top of the frame as the

arrow shows (Pic 4).

The scale can be used with or without windshield.

PFA-200702-Rev004-UM-en

Pic. 1

Pic. 2

Pic.. 4

Notch

Pic. 3