Gaggenau AI 442 120 CN Manuale di istruzioni - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per Cappa di ventilazione Gaggenau AI 442 120 CN. Gaggenau AI 442 120 CN 12.
Stampa la pagina
Changing the sensitivity of the sensor
If the sensor control reacts too quickly or too slowly,
change the sensitivity setting.
1
When the fan is switched off, press and hold the
button for approx. 4 seconds.
The setting is displayed.
2
Press button 1, 2, 3 or the
sensitivity setting.
Button 1
= Sensitivity 1
Button 2
= Sensitivity 2
Button 3
= Sensitivity 3
Ž
button = Sensitivity 4
3
Press and hold the
4 seconds.
The change is saved.
Saturation display
If the metal grease filters are saturated, the
flashes.
If you have not yet done so, the metal grease filters
should be cleaned now.
For instructions on how to clean the metal grease filters,
please refer to the
Cleaning and maintenance
Resetting the saturation indicator
œ
Press the
button.
Lighting
The lighting can be switched on and off independently
of the ventilation system.
Switching on or off
Press the ž button.
Setting the brightness
Press and hold the ž button until the desired
brightness is reached.
Safety shut-off
For your safety, the appliance has a safety shut-off
function. The lighting switches off after 12 hours and
the fan after 4 hours if the appliance is not operated
during this time.
Ž
button to change the
<
button for approx.
œ
section.
Cleaning and maintenance
m
Risk of burns!
<
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
m
Risk of electric shock!
Penetrating moisture may result in an electric shock.
Clean the appliance using a damp cloth only. Before
cleaning, pull out the mains plug or switch off the circuit
breaker in the fuse box.
m
Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
m
Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Cleaning agents
button
Observe the information in the table to ensure that the
different surfaces are not damaged by using the wrong
type of cleaning agent. Do not use
▯
harsh or abrasive cleaning agents,
▯
cleaning agents with a high concentration of
alcohol,
▯
hard scouring pads or sponges,
▯
high-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the
cleaning agents.
Area
Stainless steel
Aluminium and plas-
tic
Cleaning agents
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth.
Clean stainless steel surfaces in the
direction of the grain only.
Special stainless steel cleaning prod-
ucts are available from our after-sales
service or from specialist retailers.
Apply a very thin layer of the cleaning
product with a soft cloth.
Glass cleaner:
Clean with a soft cloth.
7