GREAT PLANES ElectriFly TRITON2 Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Caricabatterie GREAT PLANES ElectriFly TRITON2. GREAT PLANES ElectriFly TRITON2 16. Computerized charger, discharger, cycler

Stampa la pagina

Input voltage:

Input connections:

Number of outputs:

Battery types, # cells:

Fast charge current:

Fast charge termination:

Peak sensitivity:

Peak delay at start:

Trickle charge current:

Fast charge safety timer:

* requires optional thermal probe – GPMM3151

SPECIAL FEATURES

• Updated control dial and re-formatted instructions for

easier programming

• Handles 1-5 lithium-polymer or lithium-ion cells in series

• 0.1 – 7.0A adjustable charge current

• LCD includes a blue back-light

• Banana plugs on input connector, and includes mating

gator clips

• Precision "zero deltaV" peak detection with adjustable

sensitivity for NiCd and NiMH batteries

• "Constant current / constant voltage" charge method for

Pb and LiPo/Ion batteries

• Fast charge thermal cutoff (GPMM3151 thermal probe

available separately)

• Top-off charge feature fully charges NiMHs without overheating

• 0–250mA adjustable trickle charge current (NiCd and NiMH only)

• 0.1–3.0A adjustable discharge current

• Adjustable discharge cutoff voltages for NiCd/MH (pre-set

voltages for Pb and LiPo/Ion).

• NEVER attempt to charge incompatible types of rechargeable batteries as permanent damage to the battery and charger could result.

• NEVER use automotive type battery chargers to power the charger.

• NEVER allow water, moisture or foreign objects into the charger.

• NEVER block the air intake holes or fan which could cause the charger to overheat.

• NEVER attempt to use batteries with more cells or total voltage than listed in the specifications

• NEVER leave the charger unattended while charging. Disconnect the battery and remove input power from charger

immediately if the charger becomes hot!! Allow the charger or battery to cool down before reconnecting.

• NEVER place the charger or battery on a flammable surface or near a flammable object while in use. Keep away from

carpets, wood, plastic, paper, cluttered workbenches, etc.

• NEVER overcharge batteries as permanent damage could result. Do not use a charge or discharge current rate which

exceeds the safe level of the battery. Do not attempt to charge or discharge a battery if it is hot.

• ALWAYS disconnect from power source when not in use.

• ALWAYS keep out of reach of children.

• ALWAYS connect the charge lead to the charger before connecting the battery to the lead. And ALWAYS disconnect the

battery from the charge lead BEFORE disconnecting the charge lead from the charger. Otherwise, if the ends of the charge

lead touch each other while the battery is still connected, a severe and dangerous short-circuit condition will result.

SPECIFICATIONS

11.0–15.0V DC

banana plugs with mating

gator clips

one

1-24 NiCd/MH (1.2 - 28.0V)

1-5 LiPo or Li-Ion (3.6, 3.7,

7.2, 7.4, 10.8, 11.1, 14.4,

14.8, 18.0, and 18.5V)

6, 12, 24V Pb (2V per cell)

0.1-7.0A linear NiCd/MH

(0.1A step, 90W max.)

1C rating for LiPo/Li-Ion

"zero deltaV" peak detection

for NiCd/MH

"cc/cv" for Pb and LiPo/Ion

* optional thermal cutoff

NiCd 5-20mV, NiMH 3-15mV

0-60 minutes (NiCd/MH only)

0 - 300mA (NiCd/MH only)

0-990 minutes

IMPORTANT WARNINGS

NiMH max. charge cap:

NiMH top off charge:

Thermal cutoff:

Discharge current:

Discharge cutoff voltage:

Cycle count:

Cycle time delay:

Battery memories:

Programming controls:

Display type:

Audible indicators:

Output connectors:

Case material:

Cooling system:

Current overload:

Case size:

Weight:

• Perform 1 to 10 cycles (NiCd/MH only)

• Recall data for 10 full cycles

• Configure up to 10 batteries in memory for instant, easy

re-call and charger setup

• Displays input and output volts, peak charge volts, average

discharge volts, charge and discharge capacities, currents

and time, error messages

• Audible sound cues aid in programming and notification of

function changes.

• Warning messages for improper input voltage, poor connections,

unsuitable battery condition, reverse polarity on output

• Safety features include cool-off time delay, maximum NiMH

charge input, fast charge safety timer, current overload and

reverse polarity protection

• Built-in cooling fan, for better charge efficiency and

extends life of charger

• Small and lightweight, with a super-sturdy aluminum case

for rugged durability

0-9900mAh

0-1000mA

* 50-150°F (10-65°C)

0.1-3.0A (20W max.)

NiCd/MH 0.5-1.20V per cell

(0.9V/cell fixed during cycle)

LiPo/Ion fixed at 3.0V per cell

Pb fixed at 1.8V per cell

1-10 cycles (NiCd/MH only)

1-60 minutes

10 memories

modified jog dial, 2 pushbuttons

2 x 16 LCD with blue backlight

10 melodies, on/off

banana jacks

extruded aluminum

built-in fan

solid state

6.2 x 4 x 2 in (157x102x51mm)

16.4 oz. (466g)