AFG 2.0 AE Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Allenatore ellittico AFG 2.0 AE. AFG 2.0 AE 17.

Stampa la pagina
C O N SOL E O P ER AT I O N
Q U I CK STA RT
1)
Turn on Elliptical.
2)
Press START button and begin exercising.
)
Program will automatically default to MANUAL (P1), the time will count up from 0:00, and the resistance
will default to level 1.
)
The resistance level can be adjusted during the workout.
SE L E CT I N G PR OGR A MS
1)
Select a program using the PROGRAM QUICK KEY key and press ENTER.
*NOTE: If you press START before pressing ENTER, the program will begin and counts up from 0:00 for
the manual program, and count down from 30:00 for all other programs. The level defaults to 1.
2)
Select a LEVEL using the ARROW KEYS on the programming button and press ENTER.
)
Set TIME using the ARROW KEYS on the programming button and press START.
SE L EC T IN G C UST O M P RO G RA MS
1)
Select CUSTOM PROGRAM using the PROGRAM QUICK KEY and press ENTER.
2)
Set TIME using the ARROW KEYS on the programming button and press ENTER.
)
Set the RESISTANCE PROFILES using the ARROW KEYS on the programming button and
press ENTER after each RESISTANCE PROFILE is set to the desired level (repeat until all 15
segments are chosen).
*NOTE: if BACK is pressed on the programming button, it will take you back to previous
segment.
)
Press START to begin the program.
*NOTE: To reset the memory press and hold the ENTER button for 5 seconds.
1
2.0 AE_Rev.1.6.indd 18-19

PROGRAM PROFILES

MANUAL
Allows you to adjust the resistance level to your preference, without a preset program.
INTERVALS
Improves your strength, speed and endurance by raising and lowering the resistance levels
through-out your workout to involve both your heart and muscles.
WEIGHT LOSS
Promotes weight loss by raising and lowering the resistance level, while keeping you in your fat
burning zone.
CUSTOM (USER PROGRAM)
Design and store your own custom exercise program.

HEART RATE

HANDLEBARS
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your
heart rate to register. It takes 5 consecutive heart beats (15-20 seconds) for your heart rate to register. When
gripping the pulse handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure.
Keep a loose, cupping hold. You may experience an erratic readout if consistently holding the grip pulse
handlebars. Make sure to clean the pulse sensors to ensure proper contact can be maintained.
1
8/27/07 3:30:14 PM