ADEMCO Honeywell 5806 W3 Manuale di risoluzione dei problemi
Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Sensori di sicurezza ADEMCO Honeywell 5806 W3. ADEMCO Honeywell 5806 W3 9. Smoke & heat detector
Stampa la pagina
Smoke & Heat Detector Troubleshooting
«
Help Center
Smoke & Heat Detector Troubleshooting
Smoke
Testing the
Detector
Smoke
Trouble
Detector
Smoke Detector Trouble Conditions
There are several different models of Smoke Detectors. If yours is not listed below, please refer to the
Peripheral Device Manual
Ademco Honeywell 5806 W3
These Trouble Conditions apply to the
This smoke detector has 2 LEDs and a sounder to indicate the detector's status.
State
Green LED
Normal
Blinks every 10
(Standby)
seconds
Smoke Alarm Off
https://alpha.adt.com/help/89[11/12/2018 9:58:31 PM]
Heat
Testing the
Detector
Heat
Trouble
Detector
page to locate the user's manual for your device.
Ademco Honeywell 5806W3
Red LED
Off
Blinks every 1
second
Select
How They
Smoke
Work
Detector
Care
wireless smoke detector.
Sounder
Action
The device is operating normally. No
Off
action needed.
Smoke has been detected. ADT has
been contacted. Press the recessed
test switch to silence the smoke
detector sounder for 5 minutes. If
necessary, silence the alarm keypad.
Remove the source of the smoke, if
Pattern
it can be done safely. If necessary,
fan the smoke detector for a few
minutes to further dissipate any
Heat
Related
Detector
Topics
Care