Automationdirect.com Productivity 2000 P2-08TAS Manuale - Pagina 2
Sfoglia online o scarica il pdf Manuale per Unità di controllo Automationdirect.com Productivity 2000 P2-08TAS. Automationdirect.com Productivity 2000 P2-08TAS 4. Ac isolated output
Stampa la pagina
Module Installation
WARNING:
Do not apply field power until
the following steps are completed. See
hot-swapping procedure for
exceptions.
Step One:
Align module
catch with base slot and
rotate module into
connector.
Step Two:
Pull top locking
tab toward module face. Click
indicates lock is
engaged.
Step Three:
Attach field wiring using the removable
terminal block or ZIPLink wiring
system.
2
www.productivity2000.com
2
rotate
to seated
position
1
Align
with slot
Locked
Unlocked
QR Code
Caution: If possible, remove field power prior to
proceeding. If not, then EXTREME care MUST be taken
to prevent damage to the module, or even personal injury
due to a short circuit from the live terminal block.
Important Hot-Swap Information
The Productivity2000 supports hot-swap! Individual
modules and entire remote base groups can be taken
offline, removed, and replaced while the rest of the
system continues controlling your process. Before
attempting to use the hot-swap feature, be sure to read
the hot-swap topic in the programming software's help
file or our online documentation at AutomationDirect.com
for details on how to plan your installation for use of this
powerful feature.
Tech Support 770-844-4200