Agrowtek AXG Manuale di istruzioni - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per Sistema di sicurezza Agrowtek AXG. Agrowtek AXG 6. Strobe-horn alarm module

Installation Instructions

AXG sensors are designed for indoor wall mounting near ceiling level for noti cation of carbon dioxide

concentration limits. Consult your local authority for the quantity and location requirements for sensors and

alarm modules. Typical requirements are outlined below.

Installation Location Requirements:

• Compliant with NFPA70; 80-96" from floor, 6" from ceiling

• Locate the sensor on the wall furthest from the entry way.

• Locate the sensor near the center of the wall.

• Avoid areas with condensation or water spray.

• Always mount the RJ-45 connection on the bottom to avoid water ingress through the connection.

Installation Notes

NOTICE

GrowNET™ ports use standard RJ-45 connections but are NOT compatible the Ethernet network equipment.

Do not connect GrowNET™ ports to Ethernet ports or network switch gear.

DIELECTRIC GREASE

Dielectric grease is recommended on RJ-45 GrowNET™ connections when used in humid environments.

Place a small amount of grease onto the RJ-45 plug contacts before inserting into the GrowNET™ port.

Non-conductive grease is designed to prevent corrosion from moisture in electrical connectors.

• Loctite LB 8423

• Super Lube 91016 Silicone Dielectric Grease

CEILING

FLOOR

• Dupont Molykote 4/5

6" Min.

80-96"

• CRC 05105 Di-Electric Grease

• Other Silicone or Lithium based insulating grease