Adesso Astoria Arc 5170-21 Istruzioni di montaggio

Sfoglia online o scarica il pdf Istruzioni di montaggio per Luce per esterni Adesso Astoria Arc 5170-21. Adesso Astoria Arc 5170-21 2.

Assembly Instructions (English)

ASSEMBLY INSTRUCTION FOR

Astoria Arc Lamp

Model# 5170-21 / 22

1. Insert tube (B) into shade (A), tighten the pre-set screw (C) with Allen key (D). (For easy

access to pre-set screw (C), rotate shade (A) upward.) Insert the tube (B), (E)and (F) together ,

then tighten the pre-set screws (C) with Allen wrench (D).

2. Fold the excess cord and insert into tube (G).

3. Unscrew and remove pre-set screw (H), insert tube (F) into (G), tighten screw (I) with Allen

wrench (D).

Note: The Arc lamp should face forward in the same direction as the switch, and cord

coming out of the back of the base.

4. Screw tube (G), (J) and (K) together until tight.

5. Insert tube (k) into base (L) & washer (M), then tighten it with nut (N) using wrench (O).

You may need to pull any excess cord gently through the poles so that these two parts fit.

GENERAL PRODUCT INFORMATION:

This product is suitable for dry locations only.

---------------------------------------------------------------

IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug as a feature to reduce the risk of electric shock (one blade is

larger than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully

in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.Do not use with an

extension cord unless the plug can be fully inserted.

----------------------------------------------

BULB TYPE: type A Max 100W bulb (bulb not included).

(3)* HEX screw (C)

(1)* Washer (M)

DO NOT ALTER THE PLUG .

PARTS DIAGRAM:

(1)* Allen Wrench (D)

(1) * HEX screw (H)

(1)* Nut (N)

(1)* Wrench(O)

21 Penn Plaza Suite 909 New York,NY 10001

5170-21/22

1.0

(1)* Allen Wrench (I)

Tel: (212) 736 4440 Fax: (212) 736 4806