Coram Showers OPTIMA Series Manuale - Pagina 13

Sfoglia online o scarica il pdf Manuale per Cabine doccia Coram Showers OPTIMA Series. Coram Showers OPTIMA Series 16.

PN40260

PN4745

Fit 'flipper seal' (PN40260) onto the edge of the fixed panel.

Ensure the flipper seal 'flap' is on the inside.

Note: Wetting the glass with water will help to fit the seal.

From inside the enclosure, tighten all 2 fixed panel bracket

grub screws onto the glass using the allen key - do not

overtighten. Fit the cover caps (PN4745) into the holes.

IMPORTANT: It is advised that this stage is carried out by two people to avoid damaging the runners, rails or door.

From inside the enclosure, push fit the 'runners' fitted to the top and bottom of the door, onto the 'door rollers' pre-fitted in the

top and bottom rails.

Inside

From inside

PN40259

Push fit 'flipper seal' (PN40259) onto the back edge of the door.

Ensure the flipper seal 'flap' is on the outside of the door.

Test the 'magnetic seal' (PN40258) against the 'magnetic

profile' to ensure it is the correct way around. Push fit

magnetic seal onto the closing edge of the door (the same

side as door handle hole).

Note: Wetting the glass with water will help to fit the seals.

Top of door

Bottom of door

PN40258

Outside

face of

door

Door

handle

hole