aireRyder F0020 Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Ventilatore aireRyder F0020. aireRyder F0020 9.

Stampa la pagina

Switch Box

Wire Connector

Suction Cap

GU10 LED Bulb Max.10W

GU10 LED Bulb

3X6W (included)

Reverse

Slide Switch

Forward

Fan Light Pull

Chain

Fig.17-a

Install two pull chains and drops onto the pull chains located in the switch box and light kit.

The pull chain controls the fan speed as follows:

1 pull – High, 2 pull – Medium, 3 pull – Low, and 4 pull – Off.

To turn the light kit "ON" or "OFF", pull the chain that is attached to the light kit.

Caution: If you install a remote control or a wall control for this fan, pull the pull chains to "high speed" of the

fan motor and "on" of the fan light.

Fig.18

Make wire connection:

-- connect the blue wire from the switch

box to blue wire from the fan light with

wire connector.

-- connect the white wire from the switch

box to white wire from the fan light with

wire connector.

Fan Light

Carefully put the wires into the switch box.

Fig.14

Install bulbs (Included).

a. Attach the suction cap to the top surface of the halogen bulb lens.

b. Insert and twist the bulb (GU10 BASE MR16C BULB ONLY) into the socket

by using the suction cap.

c. Remove the cupule from the halogen bulb lens by pulling the knob of the suction

cap.

d. Repeat with other bulbs.

Note: Do not discard the suction cap, it will be needed when replacing the

bulb.

Note: Adjust the spotlight head to a desired position by using the swivel.

Fig.16

Caution: Turn off the power and allow the fixture to cool down completely

before relamping the lamp.

Switch Box

Fan Speed Pull

Chain

Install pull

chains and

drops

Turn ON the electric power at the main fuse

or circuit breaker box.

The slide switch on the switch box sets the direction of fan rotation.

Select the

desired

direction of fan rotation. Push the slide switch

down for " Forward" and up for "Reverse".

Note: Wait for fan to stop before reversing the direction of blade

rotation.

Reverse

Slide Switch

Forward

Switch Box

Screw

Secure the fan light onto the switch box

by using the switch box screws.

Fig.17-b

180725

Fig.15