GameFactor MG600 Manuale rapido - Pagina 9

Sfoglia online o scarica il pdf Manuale rapido per Monitor GameFactor MG600. GameFactor MG600 14. Gaming monitor

INSTALLATION

3. Connect the Displayport or HDMI cable of your

computer to the corresponding port on the back of

the monitor (1).

4. Connect the power supply cable to the monitor.

5. On: Press the power button to turn on your monitor.

6. Off: Press the power off button to turn off your

monitor.

When the monitor is operating under normal

conditions, the LED indicator light will be green (or

blue); If the monitor is in saving mode, the LED indicator

light will be red. When the power indicator is off, the

monitor is in the power off mode. Please disconnect

the power cord when the monitor is not being used.

INSTRUCTIONS FOR USE

1. Turn on your monitor (your monitor should be

receiving a signal to enter the configuration menu).

2. Press the menu button on the back of your monitor.

3. Press the up and down buttons to switch between

the displayed options.

4. To select the desired option to configure, select it

with the menu button and navigate through the

menu with the buttons.

5. If you wish to back out of the previously selected

submenu press the auto button.

Settings Menu

1. Press Menu in the main menu, select MENU.

2. Press + or - to change the main menu image to

change settings.

3. Press Menu to change the sub-menu settings, and

press + or - in the menu.

4. Press + or - to adjust the settings.

5. Press AUTO to return to the main menu.