Majacraft Suzie Professional Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Ruote che girano Majacraft Suzie Professional. Majacraft Suzie Professional 12.
Anche per Majacraft Suzie Professional: Manuale (12 pagine)

Majacraft Suzie Professional Manuale
Remove the handle nut and then slide the drive wheel out of the stem handle assembly. Place the
handle and nut to one side. There is a small star washer on the drive shaft, take care it does not drop
off when you remove the drive wheel or remain stuck to the black acetyl bush.
Turn the handle assembly over so the small threaded hole near the handle pivot is on the bottom and
position the handle so it makes a 90 degree angle between the stem and handle. Using the T wrench,
carefully screw the 25mm JCB bolt in until it is tight.
2c
Check the star washer is still on the drive shaft. Now slide the drive
wheel and drive shaft back into the stem/handle assembly. When
the drive shaft is in place then screw the front handle nut on and
tighten it up.
2e
2g
4
2d
2f
2h
majacraft