AirFiltronix HS3000A4 Istruzioni per il montaggio e l'installazione - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per il montaggio e l'installazione per Pulitore d'aria AirFiltronix HS3000A4. AirFiltronix HS3000A4 5. Room air purifier
Stampa la pagina1. Unpack the HS3000A4 blower unit and check for shipping damage.
Place on table or portable cart approximately 32-34" high. (see Figure 1).
2. Unsnap latches on either side of the blower enclosure ( see figure 1) and lift the blower unit off its base (see figure 2).
Remove the line cord packaged inside the enclosure and loosen the wingnuts on either side of the compression bar
until the bar can be lifted approximately 4-5 inches above the filter frame (see figure 3). Place blower base on top of
enclosure allowing the two 8" openings in underside of blower base to sit over the two 8" collars with closed cell
gaskets on top of the enclosure.
Figure 2
Unpack the filters supplied with the unit (see appendix A) and lift the compression bar. Install filter(s) into the filter frame
with its gasketed side down (see figure 4).
HS3000A4 Room Air Purifier Installation Instructions
Figure 1
Figure 4
Figure 3