Airflow Uno hab Kit di installazione - Pagina 6

Sfoglia online o scarica il pdf Kit di installazione per Controllore Airflow Uno hab. Airflow Uno hab 16. Cavity wall decentralised mechanical ventilation with heat recovery unit
Anche per Airflow Uno hab: Manuale di installazione e istruzioni per l'uso (16 pagine), Istruzioni (2 pagine), Manuale di manutenzione (2 pagine)

Stampa la pagina

IMPORTANT

ATTENTION

CHAPTER 3

SCOPE OF

DELIVERY

2.8

Fireplaces

The relevant applicable rules for the joint operation of fireplaces, ventilation, extraction hoods must be followed.

General note

The Unohab ventilation units can be connected air monitoring sensors connected back to the Unohab controller.

Only Airflow supplied sensors should be used.

2.9

Protection against contact

The ventilation units are delivered with a fan protection grille as standard.

2.10 Motor characteristics

The ventilation units have an energy-saving, maintenance-free EC motor (electronically isolated, ball bearing-

mounted) with high energy efficiency, guarded and electronic restart.

2.11 External grille

The external grille is to be installed on the external wall.

The wall sleeve installation through the external wall has to be carried out with appropriate safety measures

taken!

2.12 Stainless steel considerations

If you are using the Airflow optional stainless steel grille (manufactured out of 304 grayed stainless steel),

can change colour slightly due to air pollution! Regular cleaning reduces the risk of discolouring.

In environments with strong air pollution particularly coastal areas, with a high salt air concentration, the stainless

steel material should be protected by an additional protective lacquering (clear acrylic lacquer).

3.0

Scope of delivery

Keep the unit in its original packaging until just before it is installed, in order to prevent any possible

damage and contamination.

Unohab Cavity Wall Installation Kit

Consisting of:

1. Unohab unit with internal grille and filter

(90000993):

– White plastic internal grille with integrated

Coarse 50% filter

– EC axial fan with 2-part connector

– EPP* half shell (base body)

– Ceramic heat exchanger

– Flow straightener

– Fan protection grille

– Pull-out tool

– Protection grille

*Expanded Polypropylene

2. 500mm wall sleeve

– Condensate wedge (fitted to the sleeve)

– 2 protective covers

– Fixing wedges

3. White external grille

Unohab Cavity Wall Installation Kit

Part no: 90001177

(90001005)

(90001007)

Installation and Operating Instructions

fig.1