Avantree BTHS-TWS106 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Cuffie Avantree BTHS-TWS106. Avantree BTHS-TWS106 7. True wireless earbuds

Avantree BTHS-TWS106 Manuale d'uso

Mono earbud use

Either side can be used separately as a mono earbud.
1. Follow the section above and pair both earbuds to your device rst.
2. Put both earbuds back into the charging case.
3. Take out the earbud you'd like to use, it will automatically reconnect with your device.

How to Factory Reset

1. Place both earbuds back into the charging case, make sure they're powered o .
2. Left Earbud First: Press & hold
3. Repeat the same process on the Right earbud.
4. Remove both earbuds from the case. Indicators on both earbuds will ash
connecting with each other.
5. Once ashing on the RIGHT earbud slows down, you can pair with your device again.
Note: before pairing again, please remember to delete Avantree TWS106R and Avantree TWS106L from your
device

Support

FAQ

View the FAQs on
https://avantree.com/product-support/BTHS-TWS106-BLK.

How to take care of your TWS106

- Always store the earbuds inside the charging case and make sure that they are safely protected.
- If you would like to clean your earbuds, we recommend that you follow these instructions.
- The TWS106 is designed to function optimally between the temperatures of 0°C and 40°C (32-100°F.)
Although it can and will function beyond this temperature range, performance may be impaired.
- Avoid storing the earbuds for extended periods of time without recharging them (max. three months.)
- The charging case is designed to charge using standard USB voltage (5v ± 0,25v). It is not recommended to
charge this product using power supplies/sources with higher voltage.
until LED indicator on the earbud triple ashes
Hold for 8s
BLUE
then turns o .
BLUE
rapidly – indicating they are
6