ADF Wed HD67401-E7R Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Ripetitore ADF Wed HD67401-E7R. ADF Wed HD67401-E7R 16.

Stampa la pagina
Industrial Electronic Devices

DEVICE CONFIGURATOR SOFTWARE:

For configure the baudrate of the two CAN branches of the device, or for updating the firmware,
you have to use the free software "SW6740X". It is downloadable on the site
and its operation is described in this document. (This manual is referenced to the last version of
the software present on our web site). The software works with MSWindows (MS 2000, XP,
Vista, Seven). When launching the SW6740X the right window appears.
For the update of Parameters (PROJECT) and/or FIRMWARE you have to follow this procedure:
Connect the AC67400 to the PC;
Connect the CAN port of AC67400 to CAN0 or CAN1 of HD6740X;
Feed the HD6740X;
In the field
"Com
Port" must be selected the COM Port of the PC where the AC67400
programmer is connected;
Then press the
"Connect
Computer and AC67400. The "COM Port Status" goes from "Disconnect" to "COM Port
Connected";
If you know the Baudrate of the CAN port you can select directly it from the field
Baudrate"; otherwise you have to select "Search Baudrate";
Press the
"Search
Device" button and wait until at the "Search Device" label appears
"Device Found (@ xxx Kbit/s)".
At this point you can write the PROJECT and/or the FIRMWARE.
The means of the fields for PROJECT are:
In the fields
"Baudrate CAN
CAN1 port are defined;
In the field
"ID
Board" it is possible to assign an ID to the device.
When the button
"Write
Project" is pressed the parameters are written into the HD67401,
HD67402, HD67403, HD67404.
When the button
"Read
Project" is pressed the parameters of the programmed device are read
and written in the fields above the button.
If it is necessary to update the firmware the button
ADFweb.com Srl – IT31010 – Mareno – Treviso
COMPort" button, it creates the connection between Personal
0" and
"Baudrate CAN
1" the baudrate for the CAN0 and
"Write
Firmware" must be pressed.
User Manual CAN Repeater
Document code: MN67401_ENG
www.adfweb.com
"CAN
INFO:
www.adfweb.com
Revision 1.002
Page 9 of 16
Phone +39.0438.30.91.31