Makita 6201DW Manuale di istruzioni - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per Trapano Makita 6201DW. Makita 6201DW 15. Cordless driver drill equipped with electric brake

Drilling operation

First, turn the adjusting ring so that the pointer on the adjusting ring points t o the

*' -

marking. Then proceed as follows.

Drilling in wood

When drilling in wood, best results are obtained with wood drills equipped with

guide

screw. The guide screw makes drilling easier by pulling the bit into the workpiece.

Drilling in metal

To prevent the bit from slipping when starting a hole, make an indentation with acenter-

punch and hammer a t the point to be drilled place the point of the bit in the indenta-

tion and start drilling.

Use a cutting lubricant when drilling metals. The exceptions are iron and brass which

should be drilled dry.

CAUTION :

.Pressing excessively on the tool will not speed up the drilling. In fact, this excessive

pressure will only serve t o damage the tip of your bit, decrease the tool performance

and shorten the service life of the tool.

.There is a tremendous force exerted on the tool/bit a t the time of hole breakthrough.

Hold the tool firmly and exert care when the bit begins to break through the workpiece.

.A stuck b i t can be removed simply by setting the reversing switch t o reverse rotation in

order to back out. However, the tool may back out abruptly if you do not hold it firmly.

.Always secure small workpieces in a vise or similar hold-down device.

Hook

A hook is provided as a standard equip-

ment. This hook i s convenient for tem-

porarily hanging the tool.

install the

hook, first insert one end of the hook into

one slot in the tool body and then insert

the other end into the other slot. Secure

the hook with the screw. The hook can be

installed on either left or right side of the

tool.