Align APS-M Aggiornamento del firmware

Sfoglia online o scarica il pdf Aggiornamento del firmware per Unità di controllo Align APS-M. Align APS-M 14. Multicopter control unit



Before updating the firmware, please remove the ESC signal wire to ensure yourself and

aircraft safety.



APS-M V2.3 must be with these products.

1. VTD1 1080 HD Digital Video Transmitter Set [HED00003]

2. PCU V2 Power Control Unit Set [HEBPCU01A]

3. G2P Gimbal DV Set [RGG202XW]

A13 GST Transmitter

 更新程式前，請務必先移除 ESC 訊號線，以確保本身及機體安全。



版本必須搭配下列商品。

APS-M V2.3

1. VTD1 1080 高清數位圖傳組 [HED00003]

2. PCU V2 電源控制組 [HEBPCU01A]

3. G2P 雲台 DV 組 [RGG202XW]

4. A13 GST 遙控器組 [HERA1302]

If it's not equipped with above mentioned equipment, please do not upgrade to V2.3, or

APS-M will not work to set up.

無搭配上述設備請勿升級至 V2.3 版本，否則 APS-M 將無法正常調整設定。



The APS-M flight controller V2.3 supports iOS V9.0 and higher ; Android V7.0 and higher.

APS-M 飛行控制系統升級至 V2.3 版本支援 iOS 版本 9.0 以上、Android 版本 7.0 以上系統。



For the best working efficiency, the specifications of the tablet or mobile phone are recommended as follows:

4GB RAM, and more than 20GB ROM storage space in order to keep the best and fast performace quality.

考量最佳使用效率，平板或手機的規格要求建議搭配：記憶體(RAM)4GB、以及儲存空間(ROM)20GB 以上；

避免因平板或手機效能不足影響作業品質。

APS-M Firmware Update Notice

APS-M 主程式升級更新注意事項

Set [HERA1302]