Align-Pilates M8-Pro Reformer Istruzioni di montaggio e manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Istruzioni di montaggio e manuale d'uso per Allenatore ellittico Align-Pilates M8-Pro Reformer. Align-Pilates M8-Pro Reformer 12.

Stampa la pagina

1) Identifying the springs

The springs can be identified with the

corresponding colour code on the coloured nut:

Red - Medium x 2

Blue - Light x 2

Green - Strong x 1

2) Adjusting the ropes

The M8-Pro includes the Pro Rope Adjusters which allows you to easily & quickly change the rope length of an

individual rope for quick set up. Once set up correctly both ropes are adjusted together using the T bar - to move the

T bar, loosen the twist pull knob and then pull out, so you can then slide the chrome part of the T bar in or out. As you

move the spring bar away from the standing platform end of the reformer, slide the T bar in under the carriage to

shorten the ropes. To lengthen the ropes pull the chrome end of the T bar out from under the carriage.

3) Adjusting the rope height

The ropes are very simple and easy to adjust; simply loosen the pulley knob and slide the riser to the desired height

and tighten the knob back up to secure at the desired height.

4) Adjusting the spring bar with the Rapid Change spring bar

The new patent pending Rapid Change (RC) spring bar (Fig. 20) dramatically changes the speed and ease of mov-

ing your spring bar! Simply lift it up with the springs in place & move it to the desired new location - job done. Please

note there is no longer a removable carriage stopper as there are inte-

grated carriage stoppers on the side arms of the Spring bar. Adjusting the

RC spring bar is up to 12 times faster than moving a traditional spring bar,

which requires removal of springs, moving the stopper, moving the spring

bar & reattaching the springs.

Important - The RC spring bar must always be moved with at least one

spring attached. Visit the Align-Pilates YouTube channel for a video on ad-

justing the RC spring bar.

5) Adjusting the head rest

The head rest has 3 positions including flat. Use the wooden height adjuster block to select the height preferred.

6) Fitting the Standing platform

a. The standing platform, (which was originally packed within the main box) can be inserted either way

round; first retract the locking knob, then insert the standing platform, and then tighten the knob. Always secure

Flat

Medium

High

the standing platform with the locking knob beofre use. Note: the standing platform can be used with or without the

optional platform extender.

7) Fitting the optional Jump Board

a. The optional jump board is interchangeable with the standing platform

b. When using the jump board the foot bar must be in the third lowest position so the jump board is supported by

the foot bar. Never use the jump board without it being supported by the padded foot bar. When inserted tighten the

knob to hold the jump board safely in position.