Alinco DJ-191 Manuale di istruzioni - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per Ricetrasmettitore Alinco DJ-191. Alinco DJ-191 18. Cert communications team procedures
Anche per Alinco DJ-191: Manuale di istruzioni (18 pagine), Riferimento rapido (3 pagine), Riferimento rapido (4 pagine)

Stampa la pagina

1. INTRODUCTION

III

2. INNOVATIVE AND NEW FEATURES .111

We at Alinco would like to thank you for purchasing the ALiNCO transceiver. Radios

and other products made by ALI NCO rank as some of the finest in the world. Your

transceiver has been manufactured and tested very carefully at the factory and will give

you satisfactory operation for many years.

We are confident that you will be very satisfied with your choice of this fine ALI NCO

radio.

The transceiver features some of the most advanced features and reliable engineering

available anywhere. Our design policy at ALiNCO is focused on developing innovative

usable features, including the following:

• Easy to readout LCD.

• Comes equipped with a 50 CTCSS Tone encoder, and with the optional EJ-28U Tone

Squelch Decoder unit, the CTCSS Tones can be decoded for selective receiving.

• Tone Burst (1750Hz) feature comes built into the transceiver.

• T.O.T. (Time Out Timer) can be set to a Duty Cycle most accommodating to the

user's requirements.

• Nine Autodial Memories easily accessed from the DTMF keypad with redial

function.

• Cable Cloning function. (not for DJ-491C)

• Direct frequency entry from the DTMF keypad

• Independent Low power output PIT key (DJ-191T/491TA1- TA3)

• Independent TX LED and RX LED

III

3. ACCESSORIES

3·1 Standard Accessories

Information in this document are subject to change wihout notice or obligation.

All brand names and trademarks are the property of their respective owners.

Alinco cannot be liable for pictorial or typographical inaccuracies. Some options

rights reserved. No part of this document may be reproduced, copied, translated

or transcribed in any form or by any means without the prior written permission

of Alinco, Inc., Osaka, Japan. English Edition Printed in Japan

NOTICE

This equipment has been tested and found to comply with the limits pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection aginst harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy, and if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur

in a particular installation.

this equipment does cause harmful interference to

radio or television reception, which can be'determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more

of the following measures.

• Reorient to relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that which the receiver is onnected.

• Consult the dealer or an experienced radio/TV technician for help.

When you unpack the ALiNCO transceiver, you will find these standard accessories:

• Ni-Cd battery (optional for DJ-491C)·

• EDC-63 (120V AC) Wall charger (T Version)·

• EDC-64 (220V AC) Wall charger (E Version)·

• Flexible rubber duckie antenna (not applicable for DJ-491 C)·

• Belt clip with two screws

• Hand strap

• Instruction Manual

·Accessories may differ depending on the version you bought.