Garmin GNS 430A Addendum al Manuale del Pilota - Pagina 21

Sfoglia online o scarica il pdf Addendum al Manuale del Pilota per Display avionico Garmin GNS 430A. Garmin GNS 430A 27. Friendlypanels gps for microsoft fs9 & fsx
Anche per Garmin GNS 430A: Manuale di istruzioni (6 pagine), Addendum al Manuale del Pilota (4 pagine), Riferimento rapido (23 pagine), Addendum al Manuale del Pilota (22 pagine), Specifiche (2 pagine), Manuale operativo (27 pagine)

Conﬁ guring TCAD Data on the Map Page

The display of trafﬁ c information closely resembles the display symbology used by the Ryan TCAD.

Trafﬁ c data is only displayed on the Map Page if heading data is available.

To conﬁ gure Trafﬁ c on the Map Page:

1. Turn the small right knob to select the Map Page.

2. Press MENU to display the Page Menu.

3. Use the small right knob to select 'Setup Map?' and press ENT.

4. The flashing cursor highlights the GROUP field. Turn the small right knob to display the Map Setup Options

Menu. Turn the small right knob to select Traffic and press ENT.

5. Turn the large right knob to select the desired Traffic Mode option. Turn the small right knob to select the

desired option and press. Repeat the step for Traffic Symbol and Traffic Label.

6. Return to the Map Page by pressing CLR.

The Map Page has the ability to display traffic in a thumbnail format in any of the top three fields (top

four fields on a 500 Series unit) on the right-hand side of the Map Page.

To display Thumbnail Trafﬁ c on the Map Page:

1. Turn the small right knob to select the Map Page.

2. Press MENU to display the Page Menu.

3. Use the small right knob to select 'Change Fields?' and press ENT.

4. Select one of the top three fields (top four fields on a 500 Series unit). Select TRFC from the Select Field

Type List and press ENT. Note that the thumbnail range defaults to 6 nm and cannot be changed.

Section 4

Ryan TCAD Interface

You can conﬁ gure TCAD data on the Map Page

using the Map Setup Menu.