Garmin GNS 430A Manuale operativo - Pagina 5

Sfoglia online o scarica il pdf Manuale operativo per Display avionico Garmin GNS 430A. Garmin GNS 430A 27. Friendlypanels gps for microsoft fs9 & fsx
Anche per Garmin GNS 430A: Manuale di istruzioni (6 pagine), Addendum al Manuale del Pilota (27 pagine), Addendum al Manuale del Pilota (4 pagine), Riferimento rapido (23 pagine), Addendum al Manuale del Pilota (22 pagine), Specifiche (2 pagine)

2. COMMUNICATING BY USING THE GNS 430

A frequency may be quickly selected from the database by simply highlighting the

desired frequency on any of the main pages and pressing the ENT Key. This process is

referred to as auto-tuning. Once a frequency is selected in the standby field, it may be

transferred to the active frequency by pressing the COM Flip-flop Key. For example:

To auto-tuning a COM frequency for an airport:

1) Turn the large right knob to select the WPT Page Group.

2) Turn the small right knob to display the Frequency Airport Page

3) Press the small right knob momentarily to active the cursor.

4) To select a frequency, turn the large right knob to highlight the desired frequency

and press the ENT Key to place the frequency in the standby field of the COM Window.

To select a COM frequency:

1) If the tuning cursor is not currently in the COM Window, press the small left knob.

2) Turn the large left knob (click area 3) to select the desired megahertz (MHz) value.

For example, the '118' portion of the frequency '118.000'.

3) Turn the small left knob (click area 5) to select the desired kilohertz (kHz) value. For

example, the '.000' portion of the frequency '118.000'.

NOTE: The active frequency in either window cannot be accessed directly, only the

standby frequency is highlighted by the tuning cursor.

4) To make the standby frequency become the active frequency, press the COM Flip-

flop Key (click area 20)

The tuning cursor is normally in the COM Window. To select a VOR/Localizer/ILS

frequency, press the small left knob (click area 4) momentarily to place the cursor in the

VLOC Window.