Brother DCP-585CW Manuale di configurazione rapida - Pagina 26

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Stampante All in One Brother DCP-585CW. Brother DCP-585CW 45. Quick setup guide - spanish
Anche per Brother DCP-585CW: Opuscolo e specifiche (2 pagine), Manuale di configurazione rapida (29 pagine), (Inglese) Guida alla configurazione rapida (43 pagine)

For Wireless Network Users

First you must configure the wireless network settings of your machine to communicate with your network access

point (router). After the machine is configured to communicate with your access point (router), computers on your

network will have access to the machine. To use the machine from these computers, you will need to install the

drivers and software. The following steps will guide you through the configuration and installation process.

To achieve optimum results with normal everyday document printing, place the Brother machine as close to the

network access point (router) as possible with minimal obstructions. Large objects and walls between the two

devices as well as interference from other electronic devices can affect the data transfer speed of your documents.

Although the Brother DCP-585CW can be used in a both wired and wireless network, only one of the connection

methods can be used at a time.

Important

If you have previously configured the wireless settings of the machine you must reset the network

(LAN) settings before you can configure the wireless settings again.

On your machine, press Menu. Press a or b to choose Network and press OK.

Press a or b to choose Factory Reset, and then press OK.

Press

twice to choose Yes.

Note

The following instructions are for infrastructure mode.

To set up your machine in any other wireless environment you can find instructions in the Network User's

Guide on the CD-ROM.

You can view the Network User's Guide by following the instructions below.

1 Turn on your computer/Macintosh

For Windows

2 Choose your model and the language. The CD-ROM main menu will appear.

3 Click Documentation, and then click HTML documents.

For Macintosh

2 Double-click Documentation, and then double-click your language folder.

3 Double-click top.html.

Infrastructure Mode

Access Point (router)

Wireless Network machine (your machine)

Wireless capable computer connected to the access point

Wired computer connected to the access point

. Insert the Brother CD-ROM into your CD-ROM drive.