Fujitsu fi-4220C2 Come iniziare - Pagina 14

Sfoglia online o scarica il pdf Come iniziare per Scanner Fujitsu fi-4220C2. Fujitsu fi-4220C2 30. Flatbed scanner
Anche per Fujitsu fi-4220C2: Manuale delle procedure di installazione (7 pagine), Manuale delle procedure di installazione (9 pagine), Opuscolo e specifiche (2 pagine), Procedure di installazione (3 pagine), Istruzioni per la pulizia (2 pagine)

Stampa la pagina

The factory default setting for SCSI ID

is "ID 5". If the SCSI ID of another SCSI

HINT

device is set to the same ID, either

change the scanner's SCSI ID or SCSI

ID of the other SCSI device. Set the

device address using the SCSI ID

switch on the back of the image scan-

ner.

Click

This scanner supports two interfaces:

ATTENTION

Ultra SCSI and USB 2.0/1.1.

On this scanner, each of the SCSI and

USB interface can not to be used

simultaneously. Scanner can only

connect to the USB or SCSI interface.

2.3 Installing the Scanner

Application

Both the scanner driver and image capturing application

software (called "application" hereafter) must be

installed on your PC.

Two types of drivers for scanner, FUJITSU TWAIN 32

Scanner Driver and FUJITSU ISIS Scanner Driver, as

well as two software applications, ScandAll 21 and

QuickScan Pro™, are provided with this product. The

following sections describe how to install each driver

and application.

For FUJITSU TWAIN32 Scanner Driver

■ Preparation

Confirm the following items before installing the appli-

cation.

• Remove the Setup CD-ROM from its package,

but do not insert the Setup CD-ROM into the CD

driver yet.

• Confirm that the scanner is correctly connected

to your PC.

For details on how to connect the scan-

ner, refer to "2.2 Connecting the Scan-

HINT

ner to Your PC" on page 4.

• Uninstall any older versions of FUJITSU

TWAIN 32 driver if already installed.

Uninstall [Scanner Utility for Microsoft

ATTENTION

Windows] from [Add/Remove Pro-

grams] of the control panel.

• There are two types of FUJITSU TWAIN 32:

One of the following driver software will be

installed automatically according to your Oper-

ating System (OS).

For Windows 98, Windows Me, Windows 2000,

and Windows XP:

FUJITSU TWAIN32 V9

For Windows 95, Windows NT 4.0:

FUJITSU TWAIN32 V8

ASPI Manager V4.01 or later is required

(generally comes with SCSI board products).

■ Installing the FUJITSU TWAIN32

Scanner Driver

Windows XP screenshots are used in

this section as examples. The windows

HINT

and operations may slightly vary

depending on your OS.

1. Press the power button to turn on the scanner.

2. Turn on your PC and log on to Windows.

When using Windows NT 4.0, Win-

ATTENTION

dows 2000 or Windows XP, log on as

a user with "Administrator" privileges

(privileges of the administrator of your

PC).