Fujitsu ETERNUS DX100 S3 Manuale di configurazione - Pagina 23

Sfoglia online o scarica il pdf Manuale di configurazione per Immagazzinamento Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 28. Hybrid storage systems, all-flash arrays, power synchronized unit
Anche per Fujitsu ETERNUS DX100 S3: Manuale di configurazione Connessione al server (12 pagine), Manuale di configurazione Connessione al server (12 pagine), Manuale di configurazione (13 pagine), Manuale di configurazione (15 pagine), Precauzioni di sicurezza (12 pagine)

Chapter 7

Checking Connections

7.2

Setting Up the Server to Recognize the Logical Units

Check that all connected devices are listed in the ioscan output and "CLAIMED" is displayed in "S/W

State".

The following example shows the output of ioscan (LegacyView) when ETERNUS DX storage systems are

connected to a server.

# ioscan

H/W Path

============================================================

255/0

255/0/0.0

255/0/0.0.0

255/0/0.0.0.0

255/0/0.0.0.1

255/0/0.0.0.2

255/0/0.0.0.3

255/0/0.0.0.4

When the ETERNUS DX storage systems are connected for the first time, the device file (for exam-

ple, /dev/dsk/c4t0d0) sometimes may not be created.

If this happens, use the "insf" command to create the device file. Specify the hardware path name as

follows, and execute.

# insf -H hw_path_to_device -e

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

Class

iscsi

ext_bus

target

disk

Description

iSCSI Virtual Node

iSCSI-SCSI Protocol Interface

FUJITSU ETERNUS_DXL

P3AM-3402-14ENZ0