Fujitsu ETERNUS DX60 S2 Manuale di configurazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di configurazione per Immagazzinamento Fujitsu ETERNUS DX60 S2. Fujitsu ETERNUS DX60 S2 16. Server connection. (fibre channel) for aix
Anche per Fujitsu ETERNUS DX60 S2: Manuale d'uso (35 pagine), Manuale d'uso (42 pagine), Manuale di configurazione (28 pagine), Manuale d'uso (14 pagine), Manuale di configurazione (38 pagine), Manuale di installazione hardware e software (36 pagine)

Chapter 1

Workflow

Setting the Affinity Groups

Set the server accessible LUN groups.

"2.1.4 Creating and Allocating LUN Groups (Setting Host Affinity Groups)" (page 12)

•

Setting the Host Affinity

Define the relationship between the registered Host Affinity and the FC host.

"2.1.4 Creating and Allocating LUN Groups (Setting Host Affinity Groups)" (page 12)

•

Setting the Reset Groups

Assign the ports of the ETERNUS DX to the same reset group, depending on the connection conditions.

•

"2.2.1 Setting the Reset Groups" (page 13)

Setting the Subsystem Parameters (for HP-UX only)

Set whether to enable [Disable Load Balance], a function that restricts retry-required sense responses

when the ETERNUS DX is in overload.

•

"2.2.2 Setting the Subsystem Parameters (for HP-UX only)" (page 14)

Checking the WWNs

Check information that is necessary for connecting to the server.

"2.3 Checking the WWNs" (page 14)

•

After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage

ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for each OS.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

P3AM-3182-15ENZ0