Fujitsu D2952 Manuale tecnico - Pagina 14

Sfoglia online o scarica il pdf Manuale tecnico per Scheda madre Fujitsu D2952. Fujitsu D2952 38. For bx924 s2

CE certificate of conformity

Instructions for handling boards

The specific instructions in the service article for the respective end device

must be observed when installing and removing the board.

Disconnect the device plug from the shock-proof socket before carrying out

any work on an installed board.

Exercise extreme care when installing and removing all boards.

Take care not to tilt boards; they must be installed perfectly straight.

If they are incorrectly handled, the boards and the components on them, or

the other components (e.g. EMI spring contacts) and conductors can be

damaged.

Handle all locking mechanisms (engaging lugs and centering pins) carefully

when installing/removing the board or components (e.g. memory modules,

processors).

Never use sharp objects (screwdrivers) as levers.

2.2

CE certificate of conformity

The board complies with the requirements of the EC directives

2004/108/EC regarding "Electromagnetic Compatibility" and

2006/95/EC "Low Voltage Directive". This is indicated by the CE

marking (CE = Communauté Européenne).

Compliance was tested in a typical PRIMERGY configuration.

Technical Manual

D2952 (BX924 S2)