AEG A62000GNW0 Manuale d'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale d'uso per Congelatore AEG A62000GNW0. AEG A62000GNW0 20.

Environmental concerns

Slide the door off the pin (G). Unscrew

the pin (G) and install it on the opposite

side.

Unscrew the pivot pin (Z) of the hinge

(E) and the rear screw (Y) with a spanner

of 10 mm and remove the closing device

(M). Take from the accessory bag the

lower closing device left and install it on

the opposite side of the same hinge by

screwing again the rear screw.

Unscrew the upper closing device (N)

from the bottom of the door. Take from

the accessory bag the upper closing de-

vice left and install it on the opposite

side of the bottom of the door by screwing again the screw.

Install the door.

Install the bottom hinge (E) on the opposite side, using the three screws previously re-

moved inserting the hinge gasket (X).

Remove the blanking cover (F) from the ventilation grille (D) by pushing it in the direc-

tion of the arrow and install it on the opposite side.

Install the ventilation grille (D), clipping it into place.

Unscrew the handle. Remove the plug

with a punch. Install the handle and the

plug on opposite side. Take from the ac-

cessory bag the two plugs and cover the

holes left open after having removed

the handle.

10. Make sure that the front board of the

door is parallel to the front board of the

top.

11. Reposition, level the appliance, wait for

at least four hours and then connect it

to the power socket.

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the cabinet.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the gasket.

ENVIRONMENTAL CONCERNS

The symbol

treated as household waste. Instead it should be taken to the appropriate collection point

on the product or on its packaging indicates that this product may not be

180°