AEG Perfekt Pyramid?30 Manuale di istruzioni - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per Cappa di ventilazione AEG Perfekt Pyramid?30. AEG Perfekt Pyramid?30 8.
Stampa la paginaSpecifications
Perfekt Pyramid‐30
Power Supply
Rated Input Power
Lighting Power
Motor Power
Airflow
Outlet Diameter
Hardwire or Plug
Perfekt Pyramid‐36
Power Supply
Rated Input Power
Lighting Power
Motor Power
Airflow
Outlet Diameter
Hardwire or Plug
110‐120V, 60Hz
97W
1 x 2W
95W
500 CFM
150mm
Plug
110‐120V, 60Hz
99W
2 x 2W
95W
500 CFM
150mm
Plug
11 | P a g e
Installation (duct is not supplied)
1. The range hood should be mounted at a distance of
24"(600mm) from an electric or induction cooktop,
and 30"(762mm) above a gas cooktop for safety and
optimum performance. If the instructions for
installation of the gas cooktop specify a greater
distance, this has to be taken into account.(see pic 1, in
next page) The exhaust air must not be discharged
into a flue which is used for exhausting fumes from
other appliances burning gas or other fuels
2. To install onto the wall, mounting bracket should be
positioned on wall 13.75"(350mm) above the bottom
of the range hood.(see pic 1 and pic 2 in next page)
3. Insert expanding screws into the holes.(see pic 2 in
next page)
4. Drill 2 holes in wall 2.75"(70mm) on either side of
centre point of range hood. Drill 2 additional holes for
mounting bracket 2.36"(60mm) from existing holes.
5. Add the boot (alternative part) to the one way valve,
and connect it to the kitchen outlet vent. (see pic 3 in
next page)
6. Insert the outer chimney, the outer chimney should be
fixed on the main body by screws. Then mount the
bracket and insert the inner chimney and screw it to
tighten.(see pic 4 in next page)
7. Ensure that the wall the hood is to be installed on is
sufficiently sturdy to carry the weight of the hood. It
should be mounted level for best performance
8. Do not connect to a common vent with any other
appliances such as a gas heater, water heater,
washer/dryer, etc.
4 | P a g e