Kohler Symbio K-1315-H Manuale di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di installazione per Apparecchiature per il bagno Kohler Symbio K-1315-H. Kohler Symbio K-1315-H 32. Bath whirlpool

Stampa la pagina

Construct 2x4

stud framing

according to the

roughing-in

information

1. Prepare the Site

NOTICE: Unless otherwise specified, floor support under the whirlpool must provide for a minimum of 80

lbs./square foot (390 Kg./square meter) loading.

- Make sure the flooring offers adequate support for your whirlpool, and verify that the subfloor is flat and level.

- The whirlpool should be installed in a corner installation. Construct 2x4 stud framing designed for your

particular installation. Frame the floor, or construct a frame for a raised installation in accordance with the

roughing in information packed with the whirlpool.

- Position the plumbing according to the roughing in information packed. Cap the supplies, and check for leaks.

2. Prepare the Whirlpool

- If this installation requires a receptor, install it now according to the instructions included with the receptor.

- Install the drain to the whirlpool according to the drain manufacturer's instructions. Do not connect the trap at

this time.

- Position a clean drop cloth or similar material in the bottom of the whirlpool. Be careful not to scratch the surface

of the product.

1012312-2-

Verify that the subfloor

offers adequate support,

and is flat and level

Kohler Co.