Kohler K-1146-H Manuale di installazione - Pagina 6
Sfoglia online o scarica il pdf Manuale di installazione per Vasche da bagno Kohler K-1146-H. Kohler K-1146-H 48. Bath whirlpool
Anche per Kohler K-1146-H: Manuale di messa a punto (4 pagine)
Stampa la pagina
Clear space
for pump
3. Secure the Unit — Models With Support Blocks
CAUTION: Risk of product damage. Do not lift the whirlpool by the piping or pump, or use the
piping or pump for structural support of the whirlpool.
CAUTION: Risk of product damage. Do not support the whirlpool by the rim.
Choose the installation option that best applies to your particular installation. Follow the appropriate
instructions.
If the subfloor is not level, shim the whirlpool support blocks as necessary.
Option Using a Cement or Mortar Bed
NOTE: Do not use gypsum cement or drywall compound for this application, as they will not provide an
acceptable, durable bond.
NOTE: The pump support bracket (when the pump banding straps are cut) and support blocks must
rest directly on the subfloor.
Spread a 2" (5cm) thick layer of cement or mortar on the subfloor where the whirlpool will be set. This
will help secure, level, and support the unit. Clear all the material away from the pump support bracket
and support block locations.
Position a piece of plastic drop cloth material on top of the cement or mortar bed. With help, carefully lift
the whirlpool into place, and make sure the pump support bracket and support blocks do not rest in the
bed material.
Insert the drain tailpiece into the trap. Make sure the whirlpool is level and resting on all support blocks.
Remove the protective tape from the rim. Apply a continuous bead of high-quality silicone sealant around
the entire rim of the whirlpool.
Option Using Construction Adhesive
Apply a generous amount of high-quality construction adhesive to the bottom of the support blocks. With
help, carefully lift the whirlpool into position.
Insert the drain tailpiece into the trap. Make sure the whirlpool is level and resting on all support blocks.
Remove the protective tape from the rim. Apply a continuous bead of high-quality silicone sealant around
the entire rim of the whirlpool.
1010564-2-B
Spread a 2" (5cm)
layer of cement or
mortar bed material
Clear spaces
for support
blocks
Apply a bead of
silicone sealant
around the entire
rim
or
Apply construction
adhesive to the
support blocks
6
Kohler Co.