AQUA FILTER EXCITO Manuale di installazione - Pagina 12

Sfoglia online o scarica il pdf Manuale di installazione per Sistemi di filtrazione dell'acqua AQUA FILTER EXCITO. AQUA FILTER EXCITO 14.

Disconnect tubing from elbow outlet connected to cartridge

AICRO-20MS.

Proceed as follows:

1) Remove safety clips

2) Symmetrically press quick connector's collar

3) Pull out the tubing

NOTE! Described procedure can be found on page 4,

point 6.2.

NOTE! When pulling out the tubing, use caution to

prevent the tubing from damage. Collapsing of the

tubing may result in damage and future water leaks.

Remove old Teflon tape out of the connectors thread

surface.

Install (screw in) connectors into new filter cartridge.

NOTE! During installing (screwing in) individual

connectors do NOT withdraw (unscrew) them at any

time. This may result in connection damage and future

water leaks.

Unscrew inlet and outlet connectors from AIPRO-20MS

filter housing.

Apply several layers of Teflon tape to the connectors

threads.

NOTE! Use only Teflon tape, do not use tow.

NOTE! Apply Teflon tape in the opposite direction to the

direction connectors will be installed.

Connect tubing with elbow outlet connector attached to

AIPRO-20MS filter cartridge.

Proceed as follows:

1) Ensure that new filter cartridge is placed in accordance

with the direction of system's water flow.

2) Insert tubing into outlet elbow connector attached to

cartridge AIPRO-20MS (correctly inserted tubing is

mounted 1.5 cm deep inside elbow connector).

3) Secure the connection with safety clip.

NOTE! Described procedure can be found on page 4,

point 6.2.

NOTE! When pulling out the tubing, use caution to

prevent the tubing from damage. Collapsing of the

tubing may result in damage and future water leaks.

In order to complete installation of the remaining

replacement cartridges, repeat the procedures

described in points 1-9.