A.M.Leonard AM70LP Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Carrello da esterno A.M.Leonard AM70LP. A.M.Leonard AM70LP 8.

Remove Caution

Label

Thumb

Release

1/4-20 x 2 1/4"

Bolt & Washer

CAUTION: Once knob is latched,

do not move thumb release until you have

completed in step #5.

Slide wire retaining clip onto wire as shown.

Insert wire through hole shutoff plate. Slide

wire retaining clip over shutoff plate and wire

until the clip locks into place.

Screen

Control Knob &

Wire Assembly

Spring

1/4-20 Hex

Nut & Washer

Handle Grips

Screen Clips

Feed control knob/wire through the

T-handle until spring touches the

round hole. CAUTION: Do Not

Compress Spring At This Time. Feed

wire through the square handle tube.

Be sure wire passes above the bolts in

the handle brace. Secure T-handle to

the tube with 1/4-20 x 2 1/4" hex bolts,

washers, and hex nuts as shown.

Remove caution label and push the

thumb release toward the center and

push down knob and shutoff spring

until knob latches.

Wire Clip

Install handle grips onto the handle

as shown. Soapy water will ease

installation. (Do not use petroleum

based products). Insert screen into

hopper by sliding it under the screen

clips. Install defector shield removed in

step #1.

Deflector Shield

Shutoff Plate

Wire