Aqua Pulse Spas Trinity Deluxe Spa Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Vasca idromassaggio Aqua Pulse Spas Trinity Deluxe Spa. Aqua Pulse Spas Trinity Deluxe Spa 18.

TURNING ON THE HEATER MANUALLY- MAINTAINING HEAT

Ensure the spa is in Active Mode.

Press the

button to adjust the temperature to the desired temperature.

Press this

button to turn on the heater manually.

You will see the word heat flashing on the touchpad, once the heat word goes solid and stops flashing the

spa is heating. If you leave the spa in active mode and leave this button turned on permanently it will

maintain the set temperature within 3 degrees. For example, if you set the spa to 38 degrees it will take the

spa to 38 degrees automatically turn off and when the spa drops 2 to 3 degrees in temperature it will turn

back on and re heat the spa to 38 degrees. If the head word in not flashing or solid on the touch pad the

button has been turned off and will need to be re pressed to turn this feature back on.

TURNING ON THE HOT WATER MASSAGE PUMP

Ensure the spa is in Active Mode.

Press this

To turn off the hot water pump press the same button again.

This pump will automatically turn itself off after a set amount of time running, if it turns off while you are

in the spa you can press the same button to make it run again.

TURNING ON THE AIR BLOWER

Ensure the spa is in Active Mode.

Press this

button to turn on the air blower.

To turn off the air blower press the same button again.

This air blower will automatically turn itself off after a set amount of time running, if it turns off while you

are in the spa you can press the same button to make it run again.

TURNING THE WATERFALL ON & OFF

The waterfall will only run whilst the spa is heating once the desired heat is reached the waterfall will

not run. When using the waterfall handle do not apply pressure to the handle at the fully open or fully

closed positions you will break the handle if you do.

To run your waterfall, turn the manual – maintaining heat button on and set the temperature button at

least two degrees above the current water temperature.

Press the

button to adjust the temperature two degrees higher that the current temperature.

Press this

button to turn on the heater manually.

Now turn the waterfall control handle anticlockwise to run the waterfall. To turn the waterfall off turn the

waterfall control handle clockwise until the waterfall stops running. Reduce the temperature button

back to the original temperature. Make sure you turn the waterfall control handle to the closed position

when you finish using this feature. If you the leave the waterfall handle in the open position the spa will

leak water when the hardcover is on the spa.

TURNING THE LIGHTS ON & OFF

button to turn on the hot water pump.