Aqua Select 832402B Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Scale Aqua Select 832402B. Aqua Select 832402B 12. Everest above-ground pool step

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ PRIOR TO ASSEMBLY/USE

The Ladder must be installed based on Manufacturer's Instructions

• One person on the Ladder/Stair at a time

• This Ladder is designed and manufactured for a specific Pool Wall Height

and/or Deck of the Pool

• For Entry/Exit of pool, face the ladder at all times

• Remove and secure Ladder when pool is not occupied

• The Ladder will be suitable up to 54" Maximum Pool Height

AQUA SELECT

This carton (832402B) contains ALL the necessary pieces and instructions for installation of your new

step. Please follow all instructions for proper installation of this step.

AQUA SELECT ® EVEREST STEP WITH FLIP UP OUTSIDE LADDER (832401BK)

This is carton 1 of 2. The step and the necessary instructions for installation are included within this

carton. You should have a second carton labeled (832420) which contains the outside ladder for

this system. All the necessary instructions for installation of the ladder are located inside the second

carton.

AQUA SELECT ® EVEREST STEP WITH IN POOL LADDER (832406EV)

There are four cartons necessary to install your entry system. You should have 1 step carton

(832402B) which includes the instructions necessary to install the step only. The second carton is

marked (832406SC) and this contains the In Pool Ladder as well as assembly and attachment

instructions to the step. Cartons three and four are (832406) Gate and (832405P) Pickets each box

contains assembly and attachment instructions to enclose your entry system.

AQUA SELECT® BRIDGE SYSTEM (832421B)

There are four cartons necessary to install your new bridge. You should have 2 step cartons

(832402B) which include the instructions necessary to install the steps only. The third carton is marked

(832405B) and this contains the crossover necessary to connect the two steps. The instructions for the

assembly and installation of the crossover are located in the crossover box. Carton 4 is the gate carton

(832406) which includes the necessary components for the gate and instructions for gate installation.

NOTE

• Small rubber mallet or hammer w/piece of wood

• Phillips head screwdriver

• Pliers

EVEREST STEP (832402B)

The sequence of the instructions may vary at points depending on the type

of step system that you have purchased. If there are different instructions for

your system, it WILL BE indicated within the step.

Please follow these notes to avoid additional steps and wasted time.

TOOLS REQUIRED

• Liquid soap or lubricant

• 40 lbs. of sand (sold separately)

• Funnel