Dell DX6000G Manuale d'uso - Pagina 23

Sfoglia online o scarica il pdf Manuale d'uso per Server Dell DX6000G. Dell DX6000G 48. Rack installation instructions — static rails
Anche per Dell DX6000G: Note di rilascio (7 pagine), Manuale di installazione e configurazione (23 pagine), Installazione del rack (2 pagine), Installazione del rack (2 pagine)

Installing the System in a Rack

If the DX6axyS system includes a rail kit, locate the Rack Installation

Instructions supplied with the rail kit. Follow the instructions to install the

rails in the rack unit and to install the DX6axyS system in the rack.

Locate the Dell DX6axyS Getting Started Guide that shipped with your

system and follow the instructions to attach the power cables and network

cables to the DX6axyS system. Connect the network ports to the cluster's

private network on the same IP subnet as the other storage nodes. The DX

Storage Node is preconfigured to network boot from the DX Cluster Services

Node and the NIC ports are preconfigured in balanced-alb modes.

After cabling the storage node, turn it on, and verify that the network boot is

successful.

NOTE:

If the network boot is not successful, verify that the cables are correctly

connected to the private network.

The DX Storage Cluster capacity is licensed. To expand the cluster capacity,

you must purchase a capacity license. When you purchase a capacity license,

you receive a capacity license card that contains an activation code. Enter the

activation code in the DX Cluster Services console to enable the additional

cluster capacity.

NOTE:

The capacity is only applicable to the cluster in which it is entered.

To activate the additional capacity, follow the instructions in the Cluster

Services Node Installation and Configuration Guide.

Setting Up the DX Object Storage Platform