Dell E2211H Manuale d'uso - Pagina 32

Sfoglia online o scarica il pdf Manuale d'uso per Monitor Dell E2211H. Dell E2211H 34. User's guide
Anche per Dell E2211H: Impostazione rapida (2 pagine), Manuale d'uso (34 pagine)

Stampa la pagina
Dell E2211H Manuale d'uso
Missing Color
Picture missing color
Wrong Color
Picture color not good
Image retention from a static
Faint shadow from the static
image left on the monitor for a 
image displayed appears on
long period of time
the screen

Product Specific Problems

Specific Symptoms
Screen image is too small
Image is centered on screen,
but does not fill entire viewing
area
Cannot adjust the monitor with
OSD does not appear on the
the buttons on the front panel
screen
No Input Signal when user
No picture, the LED light is
controls are pressed
green. When you press "+", "-"
or "Menu" key, the message
"No S-Video input signal", or
"No Composite input signal", or
"No Component input signal"  
appears
The picture does not fill the
The picture cannot fill the
entire screen.
height or width of the screen
NOTE:
When choosing DVI-D mode, the Auto Adjust function will not be available.
Dell™ Soundbar Problems
Common Symptoms
No Sound
No power to Soundbar - the
power indicator is off
No Sound
Soundbar has power - power
indicator is on
Distorted Sound
Computer's sound card is used
as the audio source
Distorted Sound
Other audio source is used
Unbalanced Sound Output
Sound from only one side of
Soundbar
Low Volume
Volume is too low
Perform monitor self-test feature check.
l
Ensure that the video cable connecting the monitor to the computer is connected
l
properly and is secure.
Check for bent or broken pins in the video cable connector.
l
Change the Color Setting Mode in the Color Settings OSD to Graphics or Video
l
depending on the application.
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color
l
Settings OSD if the Color Management is turned off.
Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
l
Run the built-in diagnostics.
l
Use the Power Management feature to turn off the monitor at all times when not in use
l
(for more information, see
Alternatively, use a dynamically changing screensaver.
l
What You Experience
Check the Scaling Ratio setting in Image Setting OSD
l
Reset the monitor to Factory Settings.
l
Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.
l
Check the signal source. Ensure the Computer is not in the power saving mode by
l
moving the mouse or pressing any key on the keyboard.
Check to make sure Video Source to S-Video, Composite or Component is powered and
l
playing video media.
Check whether the signal cable is plugged in properly. Re-plug the signal cable if
l
necessary.
Reset the computer or video player.
l
Due to different video formats (aspect ratio) of DVDs, the monitor may display in full
l
screen.
Run the built-in diagnostics.
l
What You Experience
Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if
l
the power indicator (Blue LED) on the front of the Soundbar is illuminated.
Confirm that the power cable from the Soundbar is plugged into the adapter.
l
Plug the audio line-in cable into the computer's audio out jack.
l
Set all Windows volume controls to their maximum
l
Play some audio content on the computer (i.e. audio CD, or MP3).
l
Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
l
Clean and reseat the audio line-in plug.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Clear any obstructions between the Soundbar and the user.
l
Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
l
Set all Windows volume controls to their midpoints.
l
Decrease the volume of the audio application.
l
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume
l
setting.
Clean and reseat the audio line-in plug.
l
Troubleshoot the computer's sound card.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Clear any obstructions between the Soundbar and the user.
l
Confirm that the audio line-in plug is completely inserted into the jack of the audio
l
source.
Decrease the volume of the audio source.
l
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume
l
setting.
Clean and reseat the audio line-in plug.
l
Clear any obstructions between the Soundbar and the user.
l
Confirm that the audio line-in plug is completely inserted into the jack of the sound card
l
or audio source.
Set all Windows audio balance controls (L-R) to their midpoints.
l
Clean and reseat the audio line-in plug.
l
Troubleshoot the computer's sound card.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Clear any obstructions between the Soundbar and the user.
l
Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume
l
setting.
Set all Windows volume controls to their maximum.
l
Increase the volume of the audio application.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Power Management
Modes).
Possible Solutions
Possible Solutions