Dell E2222H Manuale di servizio - Pagina 8

Sfoglia online o scarica il pdf Manuale di servizio per Monitor Dell E2222H. Dell E2222H 15. Teardown instruction
Anche per Dell E2222H: Manuale d'uso (49 pagine), Manuale di servizio semplificato (12 pagine), Manuale di servizio (15 pagine), Istruzioni (3 pagine)

5.2 Assembly Procedures:

Place a bracket chassis base on a protective

cushion.

Turn over a power board and put the power board

into the bracket chassis, locate the panel power

cable into the hook of the bracket chassis.

Take a interface board, connect a LVDS cable to the

connector of the interface board, then connect the

cable of the power board to the connector of the

interface board. Turn over the interface board and

locate it into the bracket. Use a Philips-head

screwdriver to tighten 4pcs screws for locking the

power board and interface board.

(No.1 screw size=M4x8, Torque=5±0.5kgfxcm;

No.2~4 screw size=M3x7.5, Torque=5±0.5kgfxcm)

5. Disassembly and Assembly Procedures

Take a mylar to insert the hooks of the bracket to

cover the power board.

The following two steps (S6 and S7) is processed in

LCM assemble line. Take 1pcs function key board

and 1pcs front bezel from the carton, then put the

middle bezel into a fixture, and locate the function

keyboard into the hooks of the front bezel Use a

Philips-head screwdriver to tighten 3pcs screws for

locking the function key board with the front bezel,

then paste 1pcs black mylar tape to cover the

function key board.

(No.1~3 screw size=M2x2.4, Torque=0.8±0.2kgfxcm

Take 1pcs panel module, then put the panel into the

front bezel and locate the panel into the hooks of the

front bezel for the two parts firmly attached.