Dell EMC VxFlex Ready Node R840 Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Immagazzinamento Dell EMC VxFlex Ready Node R840. Dell EMC VxFlex Ready Node R840 44.

Viewing Home screen

The Home screen displays user-configurable information about the system. This screen is displayed during normal

system operation when there are no status messages or errors. When the system turns off and there are no errors,

LCD enters the standby mode after five minutes of inactivity. Press any button on the LCD to turn it on.

Procedure

To view the Home screen, press one of the three navigation buttons (Select, Left, or Right).

To navigate to the Home screen from another menu, complete the following steps:

Press and hold the navigation button till the up arrow

Navigate to the Home icon

Select the Home icon.

On the Home screen, press the Select button to enter the main menu.

Setup menu

The Setup menu contains the following options:

Note:

When you select an option in the Setup menu, you must confirm the option before proceeding to the next

action.

iDRAC

Select DHCP or Static IP to configure the network mode. If Static IP is selected, the available fields are IP,

Subnet (Sub), and Gateway (Gtw). Select Setup DNS to enable DNS and to view domain addresses. Two

separate DNS entries are available.

Set error

Select SEL to view LCD error messages in a format that matches the IPMI description in the SEL. This enables you

to match an LCD message with an SEL entry.

Select Simple to view LCD error messages in a simplified user-friendly description. For information about the

event and error messages generated by the system firmware and agents that monitor system components, see the

Error Code Lookup page at

Set home

Select the default information to be displayed on the Home screen. See View menu section for the options and

option items that can be set as the default on the Home screen.

View menu

The View menu contains the following options:

Note:

When you select an option in the View menu, you must confirm the option before proceeding to the next

action.

iDRAC IP

Displays the IPv4 or IPv6 addresses for iDRAC9. Addresses include DNS (Primary and Secondary), Gateway, IP,

and Subnet (IPv6 does not have Subnet).

MAC

Displays the MAC addresses for iDRAC, iSCSI, or Network devices.

Name

Displays the name of the Host, Model, or User String for the system.

using the up arrow

qrl.dell.com

is displayed.

System overview

R840xd Owner's Guide