Dell PowerEdge M1000e Manuale d'uso - Pagina 28

Sfoglia online o scarica il pdf Manuale d'uso per Interruttore Dell PowerEdge M1000e. Dell PowerEdge M1000e 44. Expansion modules for dell networking switches
Anche per Dell PowerEdge M1000e: Manuale di aggiornamento (44 pagine), Manuale di aggiornamento (21 pagine), Manuale di aggiornamento (14 pagine), Manuale di installazione (7 pagine), Manuale introduttivo (12 pagine), Manuale introduttivo (12 pagine), Specifiche tecniche (3 pagine), Manuale introduttivo (14 pagine), Manuale introduttivo (12 pagine), Come iniziare (2 pagine), Manuale di riferimento (17 pagine)

Table 2-2. Cabling the Private Network

Module Type

Gigabit Ethernet

pass-through

module

Cabling the Public Network

The public (client) network is used for client access and private network

failover. Each cluster node connects to the public network through the first

embedded NIC port on the server module system board. The first NIC port

connects to the internal connections in the system chassis to the first

Ethernet switch module or the associated port in the corresponding Gigabit

pass-through module. The Ethernet switch or Gigabit pass-through module is

connected to an external switch in the public network to provide client access

to the server module.

NOTE:

It is recommended that you configure the first NIC port on each server

module for the public network. If additional NIC ports are available on your server

module, you can use NIC teaming to aggregate multiple ports for the public

network.

Cabling Your Blade Cluster Hardware

Cluster Configuration

Two nodes in one or

two PowerEdge server

enclosure(s).

Three or more nodes

in one or two

PowerEdge server

enclosure(s).

(continued)

Private Network Configuration

Connect a standard Ethernet cable to the

corresponding cluster node ports on the

Ethernet pass-through module.

Connect a standard Ethernet cable from

the corresponding cluster node ports on

each Ethernet pass-through module to an

external switch.

Connect a standard Ethernet cable from

the corresponding cluster node ports on

the Ethernet pass-through module to an

external switch.