Dell PowerEdge M620 Manuale tecnico - Pagina 18

Sfoglia online o scarica il pdf Manuale tecnico per Interruttore Dell PowerEdge M620. Dell PowerEdge M620 44. Dell poweredge blade servers getting started guide
Anche per Dell PowerEdge M620: Aggiornamento delle informazioni (38 pagine), Note di rilascio (27 pagine), Manuale (25 pagine), Manuale d'uso (23 pagine), Informazioni importanti Manuale (35 pagine), Manuale di aggiornamento (32 pagine), Manuale di aggiornamento (28 pagine), Manuale d'uso (26 pagine), Manuale d'uso (22 pagine), Manuale introduttivo (12 pagine), Manuale introduttivo (12 pagine), Manuale tecnico (46 pagine), Manuale tecnico (49 pagine), Manuale del portafoglio (27 pagine), Manuale introduttivo (14 pagine), Manuale introduttivo (12 pagine)

Stampa la pagina

16-DIMM capacity: uses a 97 mm heatsink to support the higher ambient temperatures of fresh



air configurations

The M620 supports a flexible memory configuration, according to the following basic rules:

Speed: If DIMMs of different speeds are mixed, all channels across all processors operate at the



slowest DIMM's common frequency.

DIMM type: Only one type of DIMM is allowed per system: UDIMM, RDIMM, or LRDIMM. These



types cannot be mixed.

The following additional memory-population guidelines also apply to the M620:



Up to two quad-rank (QR) DIMMs and up to three dual-rank (DR) or single-rank (SR) DIMMs may

be populated per channel.

DIMMs must be installed in each channel, starting with the DIMM farthest from the processor.



DIMMs should be installed with largest rank count to smallest. For example, if DR DIMMS are

mixed with SR DIMMs, DR DIMMS should be placed in the lowest DIMM slots, followed by the SR

DIMMs.

For more information on memory configuration and population, see the

Systems Owner's Manual

Memory speeds of 1600 MT/s, 1333 MT/s, 1066 MT/s, and 800 MT/s are supported on the M620,

depending on the DIMM types installed and the configuration. All memory on all processors and

channels run at the same speed and voltage. By default, the system runs at the highest speed for the

channel with the lowest DIMM voltage and speed. The operating speed of the memory is also

determined by the maximum speed supported by the processor, the speed settings in the BIOS, and

the operating voltage of the system.

Table 8 lists the memory configuration and performance details for the M620, based on the

population of the number and type of DIMMs per memory channel.

DIMM

DIMM 0

type

UDIMM

RDIMM

PowerEdge M620 Technical Guide

on Support.Dell.com/Manuals.

DIMM 1

DIMM 2

DIMMs

Speed (MT/s)

# of

800

1066

∞

Dell PowerEdge M620

1333

1600

∞