Miele DA 262 i Manuale di istruzioni per l'uso - Pagina 21

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Cappa di ventilazione Miele DA 262 i. Miele DA 262 i 28.

Fitting the front facia panel /

lightshield

Screw the hinges (2) supplied to the

left and right hand sides of the front

facia panel / lightshield (1).

With the Miele aluminium lightshield

the screws are supplied.

For lightshields with a Miele kitchen

furniture programme use

3.5 x 16 mm ( 5/8 " ) screws supplied.

Push the Allen screws from the ac-

cessory kit onto the cover caps until

the screw heads lie directly under

the holes in the cover caps.

Hold the front facia panel / light-

shield against the deflector plate:

the holes in the hinges must lie over

the holes visible in the deflector

plate (3).

Secure the cover caps an fascia

panel / lightshield on both sides of

the deflector plate using the Allen

screws.

Disconnect the appliance from the

electricity supply by unplugging at

the socket, or removing the mains

fuse.

Take the dividing wall out of the wall

unit.

Release the hose clip from the ex-

haust connection and push the hose

upwards.

Loosen the securing screws used to

screw the cooker hood to the side

walls.

Pull the deflector plate out to its limit

and remove the grease filters.

Remove the screws now visible

(DA 262 i / DA 272 i = 4;

DA 292 i = 6) using a Philips screw-

driver.

Raise the cooker hood and then

lower it to remove.

Installation