Miele DA 420V-6 EXT Manuale di istruzioni per l'installazione - Pagina 17

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Cappa di ventilazione Miele DA 420V-6 EXT. Miele DA 420V-6 EXT 26.

Stampa la pagina

Electrical connection

WARNING: TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS, OBSERVE

THE FOLLOWING:

All electrical work should be

performed by a qualified electrician

in strict accordance with national

regulations (for USA: ANSI-NFPA 70)

and local safety regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous.

Ensure that power to the appliance is

OFF while installation or repair work

is performed.

Verify that the voltage, load and

circuit rating information found on

the data plate (located behind the

baffle filters), match the household

electrical supply before installing the

hood.

Use only with ventilation hood cord-

connection kits that have been

investigated and found acceptable

for use with this model hood.

If there is any question concerning

the electrical connection of this

appliance to your power supply,

please consult a licensed electrician

or call Miele's Technical Service

Department.

WARNING: THIS APPLIANCE MUST

BE GROUNDED

Grounding Instructions

WARNING - Improper grounding can

result in a risk of electric shock.

This appliance must be grounded. In

the event of an electrical short

circuit, grounding reduces the risk of

electric shock by providing a path of

least resistance.plug.

If there is any doubt, have the

electrical system of the house

checked by a qualified electrician.

To increase security before the

machine is installed, it is

recommended to install a protective

switch (30 mA).

 The hood must be hard wired

accordingly:

Black/Red wire: connect to L1 (live)

White wire: connect to N (neutral)

Green wire: connect to GND (ground)